Haylou GT6 Manual English Haylou GT6 Earbuds Manual Instructions Haylou GT6 Pairing Haylou GT6 Reset Touch Controls Charging Case Warranty User Manual Guide

Haylou GT6 Manual

Haylou GT6 Charging

Re-Checking Earbuds Features and Specs: Haylou GT6

Haylou GT6 True Wireless earbuds User manual

Haylou GT6 Reset

How do I reset my Haylou GT6?

Factory Setting:

  1. Power off the Haylou GT6 first before reset the Haylou GT6 earbuds. Take out left and right earphones and press the left and right earphone touch buttons at the same time for about 4s
    Release after the light flashes white quickly and goes out
  2. Long press the Haylou GT6 left and right earphone touch buttons at the same time for about 10s until the indicator lights up white constantly
    Release after it goes out
  3. Put the Haylou GT6 earphones back into the charging case and take them out again
  4. Clear phone pairing records, follow the pairing steps to complete Bluetooth connection
  5. If all success, Haylou GT6 Reset steps complete!
  6. If the operation is unsuccessful, please repeat the above steps; or log in to the official flagship store contact customer service to view reset
    operation video
    One of the Earbuds Mute
    It’s unusual indeed, please set earbuds to factory, remove connectivity record on phone and re-connect

Haylou GT6 Pairing

How to connect Haylou GT6? / How to pair

  1. Take two Haylou GT6 earbuds out from the charging case simultaneously, auto pair with each other, ready for pairing device
  2. Open the device Bluetooth and search “Haylou GT6”, finally click it to complete the connection
  3. If the connect success, Haylou GT6 Pairing steps complete!

Put the earbuds back to the charging case and repeat the above operation if the connection fails
After the first connection the earbuds can be automatically connected to the last paired device Bluetooth needs to be turned on
Switch between mono and stereo mode: It is stereo mode after two earbuds are successful connected. Put one back into the case to power off, the other will enter mono mode Or pick it up again to resume stereo mode

Manual connection: when earbuds are turned off, manually turn on both of them. Wait 2-3 seconds for them to turn on and connect to each other. Turn on device Bluetooth to connect when LED on both earbuds blink white slowly

Mic 1 / Mic 2 / MFB / Charging / contacts / LED / Type-C / charging port

Package Lis / Earbuds, charging case, charging cable, user manual

Haylou GT6 earbuds is popular all over the world, lots of people got their new Haylou GT6 Earbuds. As Haylou GT6 earbuds package come with the user manual instructions, there are many customer contact haylou customer service for the question as Haylou GT6 Manual English, Haylou GT6 Earbuds Manual, Haylou GT6 Instructions, Haylou GT6 Pairing, Haylou GT6 Reset, Haylou T19 user Manual and so on.

Haylou decide to edit the Haylou GT6 Manual online for customer checking anytime anywhere!

Haylou GT6 Touch Control

Haylou GT6 Controls

  • Play/pause music : Short touch MFB button
  • Skip track backward: Double touch left MFB button
  • Skip track forward: Double touch right MFB button
  • Answer incoming call : Short touch MFB button
  • Reject/hang up incoming call: Long touch MFB button for 1.5s
  • Activate voice assistant when standby: Triple touch MFB button
  • Activate voice assistant when standby :Take off one earbud, triple touch MFB button

Haylou GT6 How to Wear

Haylou GT6 How to use

  1. Gently insert the earbud into the ear canal, adjust the earbud to the most comfortable wearing state
  2. When calling, adjust Mic 2 towards mouth to gain better talking experience

Haylou GT6 Power On

  1. Open lid to auto power on when the earbuds are in case
  2. If earbuds are out of case and in power-off state keep touching the MFB button for about 1. 5s to power on
  3. LED glows white for ls
  4. Keep touching for 1.5s

Haylou GT6 Power Off

  1. Put back to charging case to auto power off earbuds
  2. Keep touching the MFB button for about 4.5s when in power-on state
  3. LED flashes white twice
  4. Keep touching for about 4.5s

Haylou GT6 Basic Parameters (earbuds)

  • Operation range: 10m(open space with no Obstacle)
  • Battery capacity: 35mAh(single earbud
  • Haylou GT6 Charging time: approx. 2hr
  • Talk time: approx. 5hr
  • Standby time: approx. 50hr
  • Input parameter: 5V=70mA
  • Battery type: li-ion
  • Bluetooth version: V5.2

Haylou GT6 Basic Parameters (charging case)

  • Input parameter: 5V= 500mA
  • Output parameter: 5V-100mA
  • Charging time: approx 2hr
  • Battery capacity: 310mAh
  • Battery type: li-ion

Haylou GT6 Charging

  • For the first time use. please remove the film on the charging contacts of both earbuds
  • Then fully charge the charging case and earbuds
  • Remove solation film
  • Plug in the charging cable to charge the earbuds and the charging case at the same time
  • The charging indicator light will be solid red when the charging case is not fully charged
  • The indicator light goes out after fully charged

Haylou GT6 Charging Problems resolve

  1. White LED turns off after 30S. It means your
    earbuds have been fully charged
  1. The earbuds won’t be charged if the charging
    case is out of power
  2. LED does not turn on when charging the case
    It means that the case has been fully charged
    so the light does not turn on

Haylou GT6 Note

  1. Please read this user manual carefully before using the product and please properly store it
  2. When using for the first time, please fully charge this product
  3. Please charge the product, in case it has not been used over two weeks

Haylou GT6 Caveats


  1. Do not disassemble, repair or modify the product for any reason, as this may cause fire or even completely destroy the product
  2. Do not expose the product to environments where the temperature is too low or too high beow0° C or above45°C)
  3. Keep the indicators away from the eyes of children and animals while using the earphones
  4. Do not use this product during thunderstorms Thunderstorms may cause the product to malfunction and increase the risk of electric
  5. Do not wipe and clean the earphones or their case with alcohol or other volatile liquids
  6. Avoid any contact with liquids

Haylou GT6 FCC Requirement

changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
(1)this device may not cause harmful interference, and
(2 )this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception.
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuit different from that to which the receive
r is connected
– Consult the dealer or an experienced radio/TV technician for help

Leave a Comment