Haylou T19 Manual English Haylou T19 Earbuds Manual Instructions Haylou T19 Pairing Haylou T19 Reset Touch Control Charging Case Warranty User Manual Guide

Haylou T19 Manual

Re-Checking Earbuds Features and Specs: Haylou T19

Haylou-T19 TWS Earphones User manual

Haylou T19 Reset

Haylou T19 Factory Reset

  1. Factory Setting – If earbuds do not function well, please refer the following steps to reset factory
  2. Push earbuds back into the case – Power off the Haylou T19 Earbuds first before reset the Haylou T19
  3. open the Case and triple click the case to set them to factory
  4. Earbuds will then auto pair with each other right earbud will serve as master and become connectable to cellphone when LED blinks white slowly.
  5. If all steps success, Haylou T19 Reset complete!
  6. If earbuds stay in the case, they will only be charged after pairing with
    each other

Haylou T19 Pairing

How do I pair my Haylou T19?

Haylou T19 How to connect?

  1. Take up two earbuds from the case They will auto power on and pairing with each other in 3s.
  2. When LED on right earbud blinks white slowly means ready for pairing
  3. Open Bluetooth on device, search for Haylou-T19 and tap on cellphone to connect both earbuds
  4. If all connecting success, Haylou T19 Pairing complete!
  5. If earbuds fail to connect to cellphone, please pop them back into case and repeat the above steps
    Earbuds will auto reconnect to the last device in connectivity records, if any. Bluetooth faculty needs to be activated
    Note: T19 has been set to factory before shipping out.

Manual pairing: power off earbuds then manually power on them again. Earbuds will auto enter TWS pairing mode(LED blinks white promptly) and finish pairing when LED on master earbud blinks white slowly. On cellphone, search the earbuds and tap to connect

Haylou T19 Mono mode

Auto connection: take up either earbud from the case, the earbud will auto power on and LED will then blink white slowly On cellphone, search for Haylou T19 and tap to connect the earbud to cellphone
Once power on, earbud will auto reconnect to the last device in connectivity records, if any. Bluetooth faculty needs to be activated
Manual pairing: power off earbuds then manually power on either earbud. When LED on the earbud blinks white slowly, search for the earbud and tap on cellphone to connect

Touch panel / mic / LED / Female charging port

Haylou T19 earbuds is popular all over the world, lots of people got their new Haylou T19 Earbuds. As Haylou T19 earbuds package come with the user manual instructions, there are many customer contact haylou customer service for the question as Haylou T19 Manual English, Haylou T19 Earbuds Manual, Haylou T19 Instructions, Haylou T19 Pairing, Haylou T19 Reset, Haylou T19 user Manual and so on.

Haylou decide to edit the Haylou T19 Manual online for customer checking anytime anywhere!

What’s in the box
Eartips 3 pairs(medium size eartips have been put on), earbuds, charging case, USB cable, user manual

Haylou T19 Touch Controls

  • Skip track backward: Double tap left earbud
  • Skip track forward: Double tap right earbud
  • Answer / end call : Double tap either earbud
  • Activate voice assistant(standby): Triple tap either earbud
  • When playing, take off either earbud and music will pause
  • Put on it again and music will resume playing

Haylou T19 LED Indicator

  • LED on earbud
  • Power-on: LED glows white for 1s
  • Connectable to phone: LED blinks white slowly
  • Earbuds paired with each other: LED blinks white promptly
  • Earbuds connected to phone: LED blinks white promptly
  • Put earbuds back into case: LED glows solid white
  • Factory setting: White led turns off
  • Power-off: led blinks white twice
  • LED on case
  • Charging: LED glows solid red
  • Topped up: LED glows white for 30s

Haylou T19 How to Use

How do I use my Haylou T19?

  • How to Wear – Please adjust earbud to fit youself best

Haylou T19 Power on

  1. Pick up earbuds from the case to power the on.
  2. If earbuds are out of the case, tap earbud twice to power on (LED glows white for 1s)

Haylou T19 Power off

  1. Pop earbuds into the case to charge them.
  2. They will auto power off once topping up.
  3. Earbuds will auto power off if no connection is built in 5 minutes

Haylou T19 How to Charge

  • For first time use, please top up earbuds and case

Other cases in charging
LED glows solid white for 1 minute when earbuds are topped up Carry case cannot charge earbuds, if its battery drains LEDs on carry case will turn off once the case is topped up. If you charge it once again, LEDs will not give any notice, which does not mean the case is not charged

Haylou T19 Basic Parameters(earbuds)

Operation range: 10m(open space with no obstacle
Battery capacity: 40mAh(single earbud
Charging time: approx. 2hr
Talk time: approx. 5hi
Stand by time: approx. 140hr
Input parameter: 5V=100mA
Battery type: li-ion
Bluetooth version v50

Haylou T19 Basic Parameters(charging case)

Input parameter: 5V= 500mA
Output parameter: 5V =150mA
Charging time: approx. 2.5hr
Standby time: approx. 4 months
Battery capacity: 600mAh
Battery type: li-ion

Audio only outputs from single earbud
It’s really rare. Please reset Haylou T19, remove connectivity record on your cellphone and re-connect the earphones to your cellphone

Haylou T19 Battery

Does Haylou T19 have noise Cancelling?

  • Yes, Haylou T19 have noise Cancelling

How do I connect my Haylou T19 to my laptop?

  • connect my Haylou T19 to my laptop steps as phone or other devices

Haylou T19 Tips

  1. Before using the headset, please read the manual
    carefully and keep it for future references
  2. The headset need to be fully charged prior to
    first-time use
    please recharge lt periodicallY
  3. If the headset is left unused for over two week
  4. Please use the chargers made by qualified
  5. If the headset cannot be found by your phone
    please check whether it is in pairing mode; if left
    unconnected for a long while the headset will exit
    pairing mode, please re-enter the mode; if a procedure
    error of your phone occurs, reboot it; if a procedure
    error of the headsetoccurs, reboot or reset it

Haylou T19 Daily maintenance

Please do not shower with earbuds. Do not wear them in rainy day. Do not leave them in washing machine or other extreme situations. Clean them with dry cloth after use in pursuing a longer service life

Haylou T19 Caveats

  1. Please charge the product, in case it has not been used over two weeks
  2. Please use certificated charger
  3. Do not wear earphones for a long term to protect your hearing
  4. Do not wear earphones in any situations with potential risks as wearing them may reduce your perception to the outside world

Haylou T19 Warranty

Address: Suite 1303, 1305 and 1306, 13/F, Project Phrase 2 of Gaosheng Tech Tower, Gaosheng Tech Park,No 5 Longxi Road, Zhouxi Community, Nancheng, District, Dongguan City, Guangdong, China
Manufacturer: Dongguan Liesheng Electronic
Co. Ltd
FCC ID: 2AMQ6-119R

Haylou T19 FCC Statement

This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: 1)this device may not cause
harmful interference, and 2) this device must accept any
interference received including interference that may cause
undesired operation
This equipment has been tested and found to comply with the limits
for a Class b digital device, pursuant to Part 15 of the FCc rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However there is
no guarantee that interference will not occur in a particular
nstallation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try correct the
interference by one or more of the following measures
Reorient the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into and outlet on a circuit different from
that to which the receiver is connected
Consult the dealer or an experienced radio/Tv technician for help
Changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the